(10) Mini Express Card (WLAN / WiMax)
Problem – Wi-Fi not working
Checking Point Wi-Fi
·
Confirm Wi-Fi driver install. It should proper install.
·
Confirm Wi-Fi antenna wire proper connect and confirm wire it may be break
and also wi-fi antenna it should be proper.
·
If above ok, then check 3.3v, 1.5v / 1.2v on wi-fi slot / wi-fi card NPC
capacitor it should be present, but same condition then clean the pin of wi-fi
card after it same problem then replace wi-fi card
·
If this voltage absent then check stepdown section.
Note – अगर पुराने मदरबोर्ड
के wi-fi स्लॉट के पिन नंबर 22 पर 5
वोल्ट की supply आ रहा है तो VRM, PCH, VGA, 3/5v,
RAM ये सभी section ok है।
Note – पुराने मदरबोर्ड मे Wi-fi पिन की संख्या 54 होती है और नए मदरबोर्ड मे पिनों की संख्या 44 होती है।
अगर 54 पिन वाले slot है तो उसके 22 नंबर पिन पर PLT-RST
होगा और 44 पिन वाले मे 44 नंबर पिन पर PLT-RST आएगा। अगर PLT-RST पर 5 वोल्ट की supply आती है तो समझिए VRM, PCH, GFX, VGA, 3/5, RAM section सही है। हमे इन सभी section मे काम करने की जरूरत
नहीं है।
अगर supply ओके है तो फिर supply
Super IO को जाएगी फिर Super IO BIOS को भेजगी तब जाकर सिस्टम on होगा।
Comments
Post a Comment